首页    Econotrol - Series: 09
econtrol-500x500

Econotrol - Series: 09

机器设备

MACHINERY

Econotrol - Series: 09

Size:2" thru 14" for 125/150 lb. Flanging

Operating Temperature:To 450°F (232°C) with standard materials

Design Standard

The PDC “Econotrol” series butterfly valve is available in sizes from 2″ thru 14″ in a combination of materials and optional features suitable for most mid-range differential pressures and service conditions.

Specifications

Size Range:

2" thru 14" for 125/150 lb. Flanging

Temperature:

To 450°F (232°C) with standard materials

Pressure Rating:

Varies with size. See Econotrol Series 09 Brochure

Shutoff Rating:

ANSI Class II

Body Style:

Wafer

Design Features

  • Inboard bushings of graphited bronze for long life, non-freezing, low torque characteristics.
  • Close tolerance machining for minimal leakage and dependable flow characteristics.
  • Adjustable packing-Graphited TEFLON® Braid. Valves can be repacked without removal from line. Rugged mounting pads drilled and tapped for ease of installing actuating equipment and accessories.
  • Flatted, keywayed or hexed ends on shafts are available to facilitate factory or field mounting of all types of actuating equipment. (Flatted shaft shown).
  • Lightweight, solid ring, wafer design for ease of installation. Four holes to insure proper alignment without transfer of pipe stresses to the valve body.
  • Contoured bore improves flow characteristics.

Applications

  • Blower Equipment
  • Compressor Equipment
  • Boiler Equipment
  • Environmental Systems
  • V.A.C
  • Industrial Process Furnaces
  • Oil Gas/Refining
  • Power Generation/Co-Generation
  • Water & Sewage
  • Stationary Engines
  • Chemical Equipment
  • Mining Equipment
  • Gas Recovery Systems

Standard Materials and Seat Construction

Body: Cast Iron
Disc: Cast Iron
Shaft: 316 Stainless Steel
Seat: Swing-thru
Bushing: Graphited Bronze (2″-14″)
Packing: Graphited Teflon Braid
Packing Nut: Brass

Optional Materials and Seat Construction

Body: Carbon Steel, 316 Stainless Steel, 304 Stainless Steel
Disc: Carbon Steel, 316 Stainless Steel, 304 Stainless Steel
Shaft: 316 Stainless Steel, 304 Stainless Steel, Incoloy, Monel
Seat: No Option
Bushing: 316 Stainless Steel, 304 Stainless Steel, Glass Filled Teflon, Metcar, Macor
Packing: Pure Teflon Braid, Teflon V-Ring
Packing Nut: 316 Stainless Steel
  1. Valve Body
  2. Valve Disc
  3. Power End Shaft
  4. Idle End Shaft
  5. Inboard Bushing
  6. Braided Packing
  7. Packing Nut
  8. Shaft Retaining Pin
  9. Pipe Plug (sealed)

Chart or Graph

*Torque, Lb-In, Required for PDC Swing Thru Butterfly Valves with Disc in Closed Position for Temperatures up to 450° Fahrenheit

*Below torques only apply to normal clean service conditions.

VALVE SIZE PRESSURE DROP ACROSS DISC IN CLOSED POSITION, PSI
  0.5 1 5 10 15 20 25 30 40 50 60 70 80 90 100 125 150
2 50 50 52 53 55 56 58 59 62 65 65 71 74 77 80 88 95
2.5 50 51 53 55 58 60 63 65 70 75 80 85 90 95 100 113 125
3 50 51 54 57 61 64 68 71 78 85 92 99 106 113 120 138 155
4 51 52 59 67 76 84 93 101 118 135 152 169 186 203 220 263
5 51 53 63 75 88 100 113 125 150 175 200 225 250 275 300
6 52 54 69 88 107 126 145 164 202 240 278 316 354
8L 54 58 88 125 163 200 238
8H 124 128 158 195 233 270 308 345 420 495 570 645 720 795
VALVE SIZE PRESSURE DROP ACROSS DISC IN CLOSED POSITION, PSI
  0.5 1 3 5 8 10 13 15 20 25 30 35 40 45 50 60 70
10 129 137 171 205 256 290 341 375 460 545 630 715 800 885 970 1140 1310
12 132 143 189 235 304 350 419 465 580 695 810 925 1040 1155 1270
14 139 157 231 305 416 490 601 675 860 1045 1230

Typical Dimensions: 2″ thru 14″

Dimensions: Inches
Size (inch) A B C D E F H Max. Delta-P (PSI) Approx. Wt. (Lbs)
2 2 2-3/4 5-3/8 1-1/2 3-7/8 4-1/4 1/2 150 9
2.5 2-1/2 3 5-5/8 1-1/2 4-5/8 4-1/4 1/2 150 10
3 3 3-1/8 5-7/8 1-1/2 5-7/4 4-1/4 1/2 150 11
4 4 4-1/4 6-3/8 1-1/2 6-3/8 4-1/4 1/2 125 12
5 5 4-7/8 6-7/8 1-1/2 7-1/2 4-1/4 1/2 100 15
6 6 5-3/8 7-3/8 1-1/2 8-1/2 4-1/4 1/2 80 17
8L 8 6-1/2 8-3/8 1-1/2 10-3/4 5-1/8 1/2 25 23
8H 8 6-1/2 9-5/8 1-7/8 10-3/4 5-1/8    3/4 90 32
10 10 8 10-5/8 1-7/8 13 5-1/8  3/4 70 40
12 12 9-1/2 11-5/8 1-7/8 15-1/4 5-1/8  3/4 50 50
14 13-1/8 10-1/2 12-1/8 1-7/8 16-1/2 5-1/8  3/4 30 70

* “G” Length and configuration of the shaft end will vary to accommodate specific actuators. Refer to the accessory section for typical flatted, keywayed, and hexed end configurations available. MAX. ∆P is based on 0° disc position, using standard materials of construction at a maximum temperature of 450° Fahrenheit. Consult factory for MAX. ∆P for elevated temperatures. 

Downloads